Total Sulfur Bacteria

IME.Test™ - TSB KOUNT Assayer
TOTAL SULFUR BACTERIA Tester
Identifies SULFATE REDUCING and SULFUR OXIDIZING Bacteria

If you can see the difference between
clear and black, you will like this test.

STEP 1: SNAPPING

U.S. Patent #:
5159799

Box of 30 Test Ampoules
Product Code #: IM96007

	SULFATE REDUCING Black Deposits		SULFUR OXIDIZING Black Liquid		OXIDIZING & REDUCING Black Liquid with Deposits
Test based upon ASTM - DD 4412-84

STEP 2: READING

USED FOR:
• Cooling Water
• HVAC
• Wastewaters
• Potable waters
• Environmental Testing
• Fuel Testing
• Lab Screening
• Industrial Process Waters
• Classroom Education

USED BY:
• Line Operators
• Lab Techs
• Inspectors
• Field Engineer/, Sales & Service Personnel
• Teachers

USED WITH:
• EPA Methods
• Or Alone

LASTS 4 + YEARS • RETAINS Test Sample • HELPS Reduce Costs

TSB KOUNT Assayer KIT DATA

TEST KIT SHELF LIFE - 4 years

# TESTS per TEST KIT: 30

TEST KIT WEIGHT - 14 ounces

TEST KIT SIZE - 3.25” x 2.75” x 5.25”

TEST KIT CONTAINER - Fiber box

TEST KIT TRANSPORTATION HAZARD Classification - None (DOT Ground)

TEST KIT CONTENTS: A kit contains 30 test ampoules, 1 sample cup and 1 color standard chart. When the 30 tests have been used, no replacement components are required, just order a new kit.

TEST KIT OPERATION STEPS:

Using the water to be tested, rinse the Sample/Snapping Cup 3 times and then fill with aqueous sample.
Place an IME.Test™ Ampoule tip down into one of the holes in the bottom of the filled Sample/Snapping Cup and pull back on the top to break the ampoule tip (see Step 1 on the other side of this sheet). The IME.Test™ Ampoule will automatically fill with the aqueous sample.
Gently rock the filled IME.Test™ Ampoule back and forth for 30 seconds (longer if the sample is cold water) to mix the test reagent. After mixing, place IME.Test™ Ampoule in a 86 to 95 (F) degree environment (I/A 2000, warm room or radiator). Periodically compare the ampoule color to the color card to determine end of test and test results. Or, select a control limit and look once at the IME.Test™ Ampoule.

RESULTS TABLES
ELAPSED TIME	CONDITION	ESTIMATED cfu/ml
<24 Hours	EXTREME	>1,000,000
24 Hours	HEAVY	>100,000
2 days	MOD/HEAVY	>10,000
3 days	MODERATE	>1,000
4 days	LIGHT	>100
5 days	TRACE	>10
6 days	NEGATIVE	0

WHAT IF: The Sample color is BLUE at the test start? - The sample water has a high Dissolved Oxygen level. The initial sample color is not Blue or Green at the start? - The sample has a color to it or if clear, the sample is anaerobic at the start of test. There is both Sulafte Reducing and Sulfur Oxidizing present. - The results chart lists the value for the combined level of both species.
USING as SAMPLER: If the IME.Test™ Ampoule is kept at a cool temperature, Biological growth will be delayed until the sample is brought to a proper incubation temperature. This feature can be used to take a sample at site and forward a proper sample to a lab. Or, if an abnormal field result is observed, the IME.TestTM Ampoule contents can be used for additional analysis (Biological or Chemical).
PRIVATE LABEL/CUSTOM TEST KITS: Private label and/or Customized TEST KITS are available upon request.

Automatic Incubator/Analyzer / Automatic Incubator/Analyzer / Coliform / Dental
E. Coli / Iron Bacteria / Micro Inspector / Potable Water / Sulfur Reducing Bacteria / Sulfur Reducing Bacteria-P
Total Microbe Family / Kool Kount / Kool Kount-P / Kool Kount 3.5/ Kool Kount .05 / Total Sulfur Bacteria / Total Sulfur Bacteria-P