IME.Test™ - SRB-P KOUNT Assayer
SULFATE REDUCING BACTERIA Tester for
CHEMICALLY TREATED WATER
If you can see the difference between
clear and black, you will like this test.
STEP
1: SNAPPING
U.S. Patent #:
5159799
Box of 30 Test
Ampoules
Product Code #: IM96107-P
Test based upon ASTM - DD 4412-84
Inhibiters
Added
NO Pretreatment Needed
(up to 50 ppm Active)
HELPS Reduce
Costs
RETAINS Test
Sample
LASTS 4 +
YEARS
STEP 2: READING
VISUAL
INSTRUMENT
USED
FOR: • Cooling Water
• HVAC
• Wastewaters
• Potable waters
• Environmental Testing
• Fuel Testing
• Lab Screening
• Industrial Process Waters
• Classroom Education
USED
BY: • Line Operators
• Lab Techs
• Inspectors
• Field Engineer/, Sales & Service Personnel
• Teachers
USED WITH:
• EPA Methods
• Or Alone
SRB-P KOUNT Assayer KIT
DATA
TEST KIT SHELF
LIFE - 4 years
# TESTS per
TEST KIT: 30
TEST KIT WEIGHT
- 14 ounces
TEST KIT SIZE
- 3.25” x 2.75” x 5.25”
TEST KIT CONTAINER
- Fiber box
TEST
KIT TRANSPORTATION HAZARD Classification - None (DOT
Ground)
TEST
KIT CONTENTS: A kit contains 30 test ampoules, 1 sample
cup and 1 color standard chart. When the 30 tests have been
used, no replacement components are required, just order a
new kit.
TEST KIT OPERATION STEPS:
Using the water to be tested, rinse the Sample/Snapping
Cup 3 times and then fill with aqueous sample.
Place an IME.Test™ Ampoule tip down into one of
the holes in the bottom of the filled Sample/Snapping
Cup and pull back on the top to break the ampoule tip
(see Step 1 on the other side of this sheet). The IME.Test™
Ampoule will automatically fill with the aqueous sample.
Gently rock the filled IME.Test™ Ampoule back and
forth for 30 seconds (longer if the sample is cold water)
to mix the test reagent. After mixing, place IME.Test™
Ampoule in a 86 to 95 (F) degree environment (I/A 2000,
warm room or radiator). Periodically compare the ampoule
color to the color card to determine end of test and test
results. Or, select a control limit and look once at the
IME.Test™ Ampoule.
RESULTS TABLES
ELAPSED
TIME
CONDITION
ESTIMATED
cfu/ml
<24 Hours
EXTREME
>1,000,000
24 Hours
HEAVY
>100,000
2 days
MOD/HEAVY
>10,000
3 days
MODERATE
>1,000
4 days
LIGHT
>100
5 days
TRACE
>10
6 days
NEGATIVE
0
See TSB KOUNT Assayer for sulfur oxidizing bacteria
identification.
WHAT
IF: The Sample color is BLUE at the test start?
- The sample water has a high Dissolved Oxygen level.
The initial sample color
is not Blue or Green at the start? - The sample
has a color to it or if clear, the sample is anaerobic
at the start of test.
USING as SAMPLER:
If the IME.Test™ Ampoule is kept at a cool temperature,
Biological growth will be delayed until the sample is
brought to a proper incubation temperature. This feature
can be used to take a sample at site and forward a proper
sample to a lab. Or, if an abnormal field result is
observed, the IME.Test™ Ampoule contents can be
used for additional analysis (Biological or Chemical).
PRIVATE LABEL/CUSTOM TEST
KITS: Private label and/or Customized TEST KITS
are available upon request.
