Hardness Level Tester

HARDNESS LEVEL TESTER
IME.Test™ Ampoules

A FAST, USER FRIENDLY TEST

Box of 30 Test
Ampoules
Product Code #: IM42847

RUNNING THE TEST
STEP 1: SNAPPING
	Using the water to be tested, rinse the Sample/Snapping Cup 3 times and then fill with sample water. Place an IME.TestTM Ampoule tip down into one of the holes in the bottom of the filled Sample/Snapping Cup and pull back on the top to break the ampoule tip. The IME.TestTM Ampoule will automatically fill with the sample water.
STEP 2: READING

Gently rock the filled IME.TestTM Ampoule back and forth for 30 seconds (longer if the sample is cold water) to mix the test reagent. Read immediately and compare the ampoule color to the color card.

U.S. Patent #:
IM42647

KIT INFORMATION

TEST KIT SHELF LIFE - 4 + years
TEST KIT WEIGHT - 14 ounces TEST KIT SIZE - 3.25” x 2.75” x 5.25”
TEST KIT CONTAINER - Fiber box; (Optional Multi-Element Test Kit and/or Plastic Carry Cases Available)
TEST KIT TRANSPORTATION HAZARD Classification - None (DOT Ground)
TEST Sample RETAINS - 7ml

TEST KIT CONTENTS: Each test kit comes complete for 30 stand alone tests. When the 30 tests have been used, no replacement components are required, just order a new kit. A kit consists of the following components:

30 - IME.Test™ Ampoules
1x - Sample/Snapping Cup
1x- Color Card

USING as SAMPLER: If the IME.Test™ Ampoule is kept at a cool temperature, Biological growth will be delayed until the sample is brought to a proper incubation temperature. This feature can be used to take a sample at site, provide preliminary results at the site and confirmation at the lab. Or, if an abnormal result is observed, the IME.Test™ Ampoule contents can be used for additional analysis (Biological or Chemical).

PRIVATE LABEL/CUSTOM TEST KITS: Private label and/or Customized TEST KITS are available upon request.

Ammonia / Chloride / Chromate / Chlorine (DPD)
Hardess / Iodine / Iron / Molybdenum / Phosphate / Zinc