| TEST KIT SHELF
LIFE - 4 years |
# TESTS per
TEST KIT: 30 |
| TEST KIT WEIGHT
- 14 ounces |
TEST KIT SIZE
- 3.25 x 2.75 x 5.25 |
| TEST KIT CONTAINER
- Fiber box |
|
| TEST
KIT TRANSPORTATION HAZARD Classification - None (DOT
Ground) |
| TEST
KIT CONTENTS: A kit contains 30 test ampoules, 1 sample
cup and 1 color standard chart. Negative control ampoules, long
wave UV Lamp, sample swabs and buffered sample solution must
be ordered separately. When the 30 tests have been used, no
replacement components are required, just order a new kit. |
| TEST KIT OPERATION STEPS: |
- Using the water to be tested, rinse the Sample/Snapping
Cup 3 times and then fill with aqueous sample.
- Place an IME.Test Ampoule tip down into one of the
holes in the bottom of the filled Sample/Snapping Cup and
pull back on the top to break the ampoule tip (see Step
1 on the other side of this sheet). The IME.Test Ampoule
will automatically fill with the aqueous sample.
- Gently rock the filled IME.Test Ampoule back and
forth for 30 seconds (longer if the sample is cold water)
to mix the test reagent. After mixing, place IME.Test
Ampoule in a 95 (F) degree environment (use carry tube in
shirt pocket). Periodically, compare the ampoule color under
any long wave UV light to the color card or negative control
ampoule to determine end of test and test results. Or, select
a control limit and look once at the IME.Test Ampoule.
|
|
|
|
|
TIME (Hrs.)
|
cfu/mL
|
|
2
|
1.5 x 106
|
|
3
|
3.5 x 105
|
|
4
|
7.7 x 104
|
|
5
|
1.7 x 104
|
|
6
|
3.8 x 103
|
|
7
|
8.6 x 102
|
|
8
|
1.9 x 102
|
|
9
|
4 x101
|
|
10
|
10
|
|
|
|
|
TIME (Hrs.)
|
cfu/mL
|
|
2
|
9.9 x 106
|
|
3
|
2.3 x 106
|
|
4
|
5.6 x 105
|
|
5
|
1.3 x 105
|
|
6
|
3.1 x 104
|
|
7
|
7.4 x 103
|
|
8
|
1.8 x 103
|
|
9
|
4.2 x 102
|
|
10
|
1 x 10
|
|
VISUAL LOW LEVEL
with Black Light
|
|
TIME (Hrs.)
|
cfu/mL
|
|
11
|
18
|
|
12
|
15
|
|
13
|
12
|
|
14
|
9
|
|
15
|
7
|
|
16
|
5
|
|
17
|
3
|
|
18
|
2
|
|
19
|
1
|
|
20
|
<1
|
|
24
|
>/=1 cfu/7ml
|
|
USING
as SAMPLER: If the IME.Test Ampoule is kept at
a cool temperature, Biological growth will be delayed until
the sample is brought to a proper incubation temperature. This
feature can be used to take a sample at site and forward a proper
sample to a lab. Or, if an abnormal field result is observed,
the IME.Test Ampoule contents can be used for additional
analysis (Biological or Chemical).
PRIVATE LABEL/CUSTOM TEST KITS:
Private label and/or Customized TEST KITS are available upon
request. |
|
|