| TEST KIT SHELF
LIFE - 4 years |
# TESTS per
TEST KIT: 30 |
| TEST KIT WEIGHT
- 14 ounces |
TEST KIT SIZE
- 3.25” x 2.75” x 5.25” |
| TEST KIT CONTAINER
- Fiber box |
|
| TEST
KIT TRANSPORTATION HAZARD Classification - None (DOT
Ground) |
| TEST
KIT CONTENTS: A kit contains 30 test ampoules, 1 sample
cup and 1 color standard chart. Negative control ampoules, sample
swabs and buffered sample solution must be ordered separately.
When the 30 tests have been used, no replacement components
are required, just order a new kit. |
| TEST KIT OPERATION STEPS: |
- Using the water to be tested, rinse the Sample/Snapping
Cup 3 times and then fill with aqueous sample.
- Place an IME.Test™ Ampoule tip down into one of
the holes in the bottom of the filled Sample/Snapping Cup
and pull back on the top to break the ampoule tip (see Step
1 on the other side of this sheet). The IME.Test™ Ampoule
will automatically fill with the aqueous sample.
- Gently rock the filled IME.Test™ Ampoule back and
forth for 30 seconds (longer if the sample is cold water)
to mix the test reagent. After mixing, place IME.Test™
Ampoule in a 95 (F) degree environment (use carry tube in
shirt pocket). Periodically compare the ampoule color to
the color card or negative control ampoule to determine
end of test and test results. Or, select a control limit
and look once at the IME.Test™ Ampoule.
|
