Using the water to be tested, rinse
the Sample/Snapping Cup 3 times and then fill with sample water.
Place an IME.TestTM Ampoule tip down into one of the holes in the
bottom of the filled Sample/Snapping Cup and pull back on the top
to break the ampoule tip. The IME.TestTM Ampoule will automatically
fill with the sample water.
STEP 2: READING
Gently rock the filled
IME.TestTM Ampoule back and forth for 30 seconds (longer if the
sample is cold water) to mix the test reagent. Read immediately
and compare the ampoule color to the color card.
U.S. Patent #:
5159799
KIT INFORMATION
TEST
KIT SHELF LIFE - 4 + years TEST KIT WEIGHT - 14 ounces
TEST KIT SIZE - 3.25”
x 2.75” x 5.25” TEST KIT CONTAINER - Fiber
box; (Optional Multi-Element Test Kit and/or Plastic Carry Cases
Available) TEST KIT TRANSPORTATION HAZARD Classification
- None (DOT Ground) TEST Sample RETAINS - 7ml
TEST KIT CONTENTS: Each test
kit comes complete for 30 stand alone tests. When the 30 tests
have been used, no replacement components are required, just order
a new kit. A kit consists of the following components:
30 - IME.Test™ Ampoules
1x - Sample/Snapping Cup
1x- Color Card
USING as SAMPLER: If the IME.Test™
Ampoule is kept at a cool temperature, Biological growth will be
delayed until the sample is brought to a proper incubation temperature.
This feature can be used to take a sample at site, provide preliminary
results at the site and confirmation at the lab. Or, if an abnormal
result is observed, the IME.Test™ Ampoule contents can be used
for additional analysis (Biological or Chemical).
PRIVATE LABEL/CUSTOM TEST KITS:
Private label and/or Customized TEST KITS are available upon request.
